32
Check near the camera for one of the common interference sources.
-
Try moving the camera away from a suspected source, or try moving the suspected source so
-
it’s not between the camera and the receiver.
Try moving closer to the receiver. There is always more noise at the edges of the receiver’s
-
range.
Resetting Your System
Resetting the camera or receiver will erase any changes and set all values back to the default.
You should only reset your system under the following conditions:
Resetting the camera
Resetting the receiver
You are unable to pair the camera to the
-
receiver.
The image on the screen is frozen.
-
The buttons on the receiver are not
-
responding.
The image on the screen is frozen, and
-
resetting the camera did not help.
To reset the camera or receiver, unplug the AC adapter. Wait at least 15 seconds, then reconnect the AC
adapter.
UWG700 OM.indd 32
28/9/11 9:42:01 AM
