19
PAIRING THE CAMERA AND MONITOR
Note: The Camera and Monitor will already come paired with each other.
Follow these steps if you need to pair them again.
On the Monitor
Press (
1.
Menu
) to open the main menu.
Using
2.
, scroll to Camera Setup and
then press (
OK
).
On the camera setup menu, scroll down
3.
to Pairing, using and then press (
OK
).
The monitor will start timing for one
4.
minute, within that minute you must
press the pair button on the camera.
(See below)
On the camera
Remove the small back section on the back of the camera.
1.
Within that small section on the back you will notice a button with the letter “P” next to it, with a small
2.
object, such as a pen, press this small button.
Once pressed, the monitor and camera will pair, the monitor screen will read “OK” and you will be able
3.
to see the cameras view on the monitor.
If the camera is not pairing with the monitor, try moving the devices closer together as well as ensure
4.
that the camera is plugged into a power source and not operating on batteries.
Pairing menu on monitor
Timer while devices is
pairing
Press the pairing button on Camera
(Make sure the camera is plugged in)
UWG700 OM.indd 19
28/9/11 9:41:52 AM
