Selecting a Channel
Turn the Rotary Channel Selector at the base or
press
/
on the optional Remote SPK/MIC
to select the desired channel.
Channel Banks - Using the POLICE Button
The UH8050S has three banks (groups) of channels to select from;
CB
UHF CB + User programmable RX channels¹
POL
Pre-programmed Police frequencies²
FIRE
Pre-programmed Fire & Ambulance frequencies²
When the
CB
icon is showing the 80 UHF-CB and any user programmed RX channels
will be available for selection or scanning. The 80 UHF-CB channels are numbered 01-
80. The user programmable RX channels are numbered 81-180 and only show, in the
DCS/CTCSS code area, when programmed.
When the
POL
icon is showing then pre-programmed police frequencies will be
available. When the
FIRE
icon is showing then pre-programmed fire & ambulance
frequencies will be available. The police, fire & ambulance frequencies do not have
channel numbers, instead
PO
appears in the channel display for a police frequency
and
FI
appears for a fire or ambulance frequency.
1. Press
[POLICE]
to select the desired channel bank(s) combination.
The channel banks can be selected as follows;
---- CB ----
POL ---- ----
---- ---- FIRE
POL ---- FIRE
POL CB ----
---- CB FIRE
POL CB FIRE
Operation
19
UNIDEN UH8050S
UHF CB Transceiver