background image

Warranty

53

UNIDEN UH8050S

UHF CB Transceiver

UNIDEN UH8050S UHF CB Transceiver

Please refer to our Uniden website for any details or warranty durations offered in 

addition to those contained below.

Warrantor:

 The warrantor is either Uniden Australia Pty Limited ABN 58 001 865 498 

(“Uniden Aust”) or Uniden New Zealand Limited (“Uniden NZ”) as the case may be.

Terms of Warranty: 

Uniden Aust/NZ warrants to the original retail purchaser only that 

the UH8050S UHF CB Transceiver

 (“the Product”), will be free from defects in materials 

and craftsmanship for the duration of the warranty period, subject to the limitations and 

exclusions set out below.

Warranty period: 

This warranty to the original retail purchaser is only valid in the original 

country of purchase for a Product first purchased either in Australia or New Zealand.

If a warranty claim is made, this warranty will not apply if the Product is found by 

Uniden to be:  

(A)  Damaged or not maintained in a reasonable manner or as recommended 

    in the relevant Uniden Owner’s Manual;

(B)  Modified, altered or used as part of any conversion kits, subassemblies or  

    any configurations not sold by Uniden Aust or Uniden NZ;

(C)  Improperly installed contrary to instructions contained in the relevant 

  Owner’s 

Manual

(D)  Repaired by someone other than an authorized Uniden Repair Agent 

    in relation to a defect or malfunction covered by this warranty; or

(E)  Used in conjunction with any equipment, parts or a system not 

    manufactured by Uniden. 

Parts Covered:

 This warranty covers the Product and included accessories.

User-generated Data: 

This warranty does not cover any claimed loss of or damage to 

user-generated data (including but without limitation phone numbers, addresses and 

images) that may be stored on your Product.

Statement of Remedy: 

If the Product is found not to conform to this warranty as 

stated above, the Warrantor, at its discretion, will either repair the defect or replace 

the Product without any charge for parts or service. This warranty does not include 

any reimbursement or payment of any consequential damages claimed to arise from a 

Product’s failure to comply with the warranty.

IMPORTANT: Satisfactory evidence of the original purchase is required for 

warranty service

Product

5 Years

Battery Pack & 

Accessories

1 Year

Summary of Contents for UH8050S

























































Reviews: