Operation
28
UNIDEN UH8050S
UHF CB Transceiver
Group Scan (GS) Mode
GS Mode has CH09 to CH20 in the SCAN
Memory by default. Channels must be stored
to the GS SCAN Memory before group scan
can start.To add/remove channels from GS
SCAN Memory, refer to p.25.
Includes the accessory feature Priority Watch
which allows you to monitor the Instant
Priority Channel while scanning
(see p.20 for setting Instant Priority Channel
and p.29 to turn on Priority Watch).
GS Scanning checks the Instant Priority Channel for activity regularly when Priority
Watch is ON.
If the Priority Channel becomes active the radio will stay on that channel for as long as
the signal is present. If the received signal ceases, Priority Scanning continues after 3
seconds.
If scanning stops on a channel which is not a Priority Channel, UHF CB Radio will
continue monitoring the Priority Channel for activity while listening to the active one.
To select GS Scan Mode:
1. Press
[MENU]
three times.
The GS setting flashes.
2. Turn the Rotary Channel Selector to change the setting between ON and OFF.
3. Press and hold
[MENU]
to save & exit from the menu mode.
NOTE
If a button is not pressed within 10 seconds the UHF CB Radio will
automatically exit the Menu Mode.
