NOTE
Appearance
Name
Description
IR Light
Auto light source for night vision. The lights are behind the panel.
Button
Solid blue
: The doorbell is starting up and running properly.
Backlight
Cycling blue and red:
WiFi is not connected.
Flashing red:
The doorbell is upgrading.
Flashing blue:
The doorbell is calling the App.
No backlight:
The doorbell is speaking with the App.
Screw 1 & 2
These 2 screws are used to connect the power cables.
Name
Description
Memory
Use this slot for a memory card, video files will be stored on the memory card.
Card Slot
RESET
If the doorbell has not been activated, hold the button for 5
Button
seconds to enter the WiFi connection mode. The call backlight
cycles blue and red.
If you d
o not o
perate the device within 3 minutes the doorbell will exit the
WiFi configuration automatically.
If the doorbell has been activated, hold the button for 15 seconds to
restore the factory settings.
IR Light
Screw 1
Screw 2
Lens
Button Backlight
Backlit Call Button
Mic
Memory Card Slot
RESET Button
Loudspeaker
4
