Uniden SDS100, Owner'S Manual

Page: 42 / 62

36
Option Description Applicable Systems
Set Attenuator
Set whether attenuation is applied
for the site.
PMDEL
Set Avoid
Set the avoid status for the site. PMDEL
Set Location Information
Select whether to use a circle
or rectangles to define the site
location, then enter the appropriate
parameters to define the site
location.
PMDEL
Delete Site
Delete the site from the system. PMDEL
New Site
Create a new site for the system. PMDEL
Edit Department –
Create/Edit
departments which hold the channels scanned on the system.
Select a department or select New Department and set a name for the department. Then, see the
following table for department options.
Setting Description Applicable Systems
Edit Name
Edit the name displayed when the
department is scanned.
PMDELC
Set Department Quick Key
Set/change the quick key used for
the department
PMDELC
Edit Channel
Enter the TGIDs or Frequencies
for the department. See Channel
Options, below
PMDELC
Set Location Information
Select whether to use a circle or
rectangles to define the department
location, then enter the appropriate
parameters to define the department
location.
PMDELC
Set Avoid
Set/change the avoid status for the
department
PMDELC
Delete Department
Delete the department and all its
channels
PMDELC
New Department
Create a new department PMDELC
Channel Options
After you enter the
Talk Group ID
(for trunked systems) or frequency (for conventional systems, the
following channel options are available.
Setting Description Applicable Systems
Set Name
Assign a name that is displayed for
the channel while scanning
PMDELC
Edit TGID
Edit the talk group ID set for the
channel
PMDEL
Set TDMA Slot
Set the slot used by the channel. D