Uniden SDS100, Owner'S Manual

Page: 25 / 62

19
The scanner selects channels from systems that overlap the thick circle. So, the system down
south that covers Burleson is included even though only part of it is covered, but Haslet, way up
north, is not included.
Each location method uses a different range. In addition to the 10-mile Zip Code radius, the
scanner uses:
• Auto Locate: 30-miles radius from the discovered radio tower.
• GPS or Manual Location: 0-miles radius.
0 miles means that your location is precisely known. For a radio system to be selected, its
circle must enclose your precise position. This setting is great if you are traveling…the scanner
automatically selects and deselects systems as you drive through each system’s coverage zone.
You can manually change the range setting to be bigger (to include more systems) or smaller (to
include fewer systems) by going to the Range menu and adjusting the range up or down.
SETTING LOCATION/RANGE
Press Menu then scroll to Set Your Location and Range and press E/yes . Scroll to through the
following option and press E/yes .