Uniden SDS100, Owner'S Manual

Page: 19 / 62

13
Scanning is performed in a mixture of FLQK order and SQK order. The scanner does not scan all
Systems in one Favorites List and then move to the next List.
For each Favorites List with a quick key, starting with 0, the scanner scans each 0 SQK in FLQK
order and then move to the next set of SQKs for each list.
Example:
FLQK 0, SQK 0; FLQK 1, SQK 0…. FLQK 98, SQK 99; FLQK 99, SQK, 99. Department and Site
Quick Keys are scanned with each System.
Systems with the same quick key are scanned in order of creation.
The Database is scanned next, in order of creation. Then, Systems with no quick key (including
created Quick Save Systems) are scanned and in order of creation.
Conventional Channels and Departments within Systems are also scanned in order of creation.
IDs are not really scanned. The scanner checks for any activity in the trunking system and:
• Displays all IDs when ID Search mode is set to On.
• Displays only programmed IDs when ID Search mode is set to Off.
Next, any Custom Searches (enabled for Search with Scan) are scanned in order (Close Call Hits
last).
Then, the scanner scans the Close Call ‘Hits with Scan’ system (if Unavoided). This is a system
that automatically stores the frequencies found by Close Call. If the ‘Hits with Scan’ system has no
frequencies, the scanner does not scan the system.
The scanner scans a system for the duration you set using the System Hold Time option. For
trunked systems, the scanner moves to the next system after the hold time expires, the current
transmission ends, and the channel delay expires. Conventional systems operate similarly, but all
(Unavoided) channels are scanned at least one time regardless of the hold time setting.
SCANNING
Scanning Checklist:
1. You must enable at least one Favorites List or the Full Database in Select Lists to Monitor.
2. Favorites Lists or Systems, with Quick Keys assigned to them, must be enabled with quick
keys or through Manage Quick Key Status.
3. Service Types required for channels must be set to On.
Any Favorites List not assigned to a quick key, not Avoided, and set to On in Select – to Monitor
will be scanned. Any System, Department, or Site (or Quick Save System/Department) not
assigned to a quick key and not Avoided, will be scanned.
REPLAY THE LAST TRANSMISSIONS
While scanning, press Replay .
Press Channel to pause/resume replay.
Turn the Scroll Control to select recordings.
Replay is not available when recording is enabled.