9
INSTALLATION
No user servicable parts inside. Contact Uniden for service.
Mise en garde : Ne comporte aucune pièce pouvant être réparée par l’utilisateur à
l’intérieur. Contactez Uniden pour l’lentretien
INSTALLATION REQUIREMENTS
Unplug the device from power before opening the device case.
• Install the device below 2000 meters altitude.
• Install the device in a horizontal position.
Do not install the device in a vertical or tilted position.
•
The device's operating temperature range is 32˚F to 104˚F (0˚C to 40˚C).
Do not locate the device in places with high temperature, humidity, dust, or smoke.
• The device is not water-resistant or waterproof. Do not place objects containing liquid such as a
glass or mug on the device.
• In order to ensure normal heat dissipation, install the device in a well-ventilated area.
•
Use Uniden's recommended specific surveillance hard disk drives (Western Digital Purple or
Seagate SkyHawk surveillance hard drives) when adding a hard disk drive.
• Verify that the XVR power supply and AC outlet are reliably grounded.
HARD DISK INSTALLATION
The following procedures must only be performed by a service technician.
CAUTION: CONFIRM THAT THE DEVICE IS POWERED OFF AND UNPLUGGED FROM
POWER BEFORE INSTALLING ANY HARD DISK DRIVES.
MISE EN GARDE : SI VOTRE SYSTÈME A MOINS DE 128 CANAUX, VEUILLEZ CONFIRMER
QUE LE DIS-POSITIF EST HORS FONCTION ET DÉBRANCHÉ DE LA SOURCE
D’ALIMENTATION AVANT D’INSTALLER DES DISQUES DURS.
Install 1 hard disk drive for either the PRO400X1 or PRO800X2 or up to 2 hard disk drives for the
PRO1600X2.
HARD DISK INSTALLATION
The following procedures detail adding an HDD to a 16-channel XVR system. Uniden
does not support adding addidional HDDs to 4- and 8-channel XVR systems.
1. Remove the cover from the 12-channel XVR by unfastening the screws on the case cover.
2. MOUNT the HDD to the bottom of the chassis using screws coming up through the bottom
plate.
3. Connect the HDD power lines and data cable.
