16
Network Setting
Uniden ProSeries QR Codes
2. Check the
Next time no longer display
box in lower left corner. This series of screens will not
display for further startups.
3. Click
Finish
.
SYSTEM SETTING
TIME SETUP
Select the
System Setting
tab. The
Time Setting
side tab displays as the default screen.
XVR systems have a CMOS clock button cell battery located on the PC board to maintain time
should power fail. Only Uniden service technicians should replace the battery (Chaochuang
Lithium Cell CR1220, 3V SC).
Battery Disposal Instructions: Check your local government website for battery
disposal guidelines. The correct procedure for disposing of different types of batteries
may vary significantly by region. Check the website for your state, city, or municipality
for information on how to dispose of batteries in your area.
1. Select the
Device Time
top tab and manuallty set the device clock.
•
Device Time:
Verify and adjust the date and time if needed (Default - Central).
•
Time zone:
Verify and adjust time zone if needed.
•
Enable DST:
Verify Daylight Saving Time setting; verify start and end dates.
•
Enable NTP Time Sync:
Recorder can be synchronized to a standard NTP time source such as
a server, a network time clock, or an internet time source (default).
If Server Address is a name and not an IP address, make sure the DNS1 and DNS2
fields in System Setting/Network Parameter are correct.
2. Click
icon to save the settings.
