Uniden MYSTIC - Marine GPS Receiver Owner'S Manual Download

Page: 8 / 132

❷

❸

❹

❺

❻

❼

❽

❾

❿

❶

Front/Side Controls

A. LCD Display

B. Push-To-Talk button

C. Microphone

D. Speaker

E. DISTRESS button, with red

plastic cover

Keys

CALL/LIGHT

-Press to display

the DSC (Digital Selective Call)

Menu.

Press and hold to change the

Backlight level.

- Press to zoom into a

Navigation Map.

GOTO/MARK

- Press to create

a GOTO Route.

Press and hold to mark a

Waypoint.

ESC

- Press to go back from a

Menu screen or a Navigation

screen.

WX/ALERT

- Press to access

the Weather Channels.

Press and hold to turn Weather

Alert On or Off.

Cursor keys

STWX

Press to move cursor up or

down on screens and maps.

1W/5W/LOCK

- Press to

change between 1 Watt and 5

Watt transmit power.

Press and hold to place radio in

KEY LOCK Mode.

OUT

- Press to zoom out on a

Navigation Map.

ENTER

- Press to accept

selection in any Menu screen.

10.

MENU

- Press to access

MYSTIC Menu screens.

11.

SCAN/MEMORY

- Press to

place radio in Triple Watch

Scan Mode.

Press and hold to enter the

current Channel into memory.

12.

16/9/TRIPLE

- Press to access

instant Channel 16 or Channel

9 communications.

Press and hold to place radio in

Triple Watch Mode.

MYSTIC Controls, Keys, and Display

Mystic OM.book Page 6 Wednesday, October 22, 2003 8:59 PM

Summary of Contents for MYSTIC - Marine GPS Receiver





































































































































Search results

Summary of Contents for MYSTIC - Marine GPS Receiver

Reviews:

Related manuals for MYSTIC - Marine GPS Receiver

Brands by name

Popular brands

Uniden MYSTIC - Marine GPS Receiver, Owner'S Manual

Search results

Summary of Contents for MYSTIC - Marine GPS Receiver

Reviews:

Related manuals for MYSTIC - Marine GPS Receiver

Brands by name

Popular brands