manualshive.com logo in svg

Uniden MYSTIC - Marine GPS Receiver, Owner'S Manual

Share
Download
Uniden MYSTIC - Marine GPS Receiver Owner'S Manual Download Page 48

46

Cursor Mode

 - In the Cursor Mode, you 

are provided with a cursor that can be 
moved on the map. At the bottom of the 
display is the information for the position of 
the cursor relative to your present position. 
Also any points of interest that the cursor is 
over will be shown.

To access the Cursor Mode, press any 
arrow on the keypad. A cross hair appears 
that can be moved with the arrow keys.

To return to the Position Mode, press 

[ESC]

. The cursor will disappear and the present position icon will 

appear centered on the map.

z

Compass Screen

The Compass Screen is a handy to have at 
your fingertips while you are navigating. It 
is totally customizable to display the 
information that is useful to you. The lower 
portion of the Compass screen not only 
displays your heading in a graphical 
manner, but also displays the relationship 
of the sun, moon and your destination (if 
navigating on a route) to your heading.

Press 

W

 or 

X

 to alternate the information at 

the top of the screen between the 
destination information (

To:

) and the 

current Channel Number (

CH:

).

W. Gladstone St.

348

O

M

25.4

M

I

Mystic OM.book  Page 46  Wednesday, October 22, 2003  8:59 PM

Summary of Contents for MYSTIC - Marine GPS Receiver





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands