manualshive.com logo in svg

Uniden MYSTIC - Marine GPS Receiver, Owner'S Manual

Share
Download
Uniden MYSTIC - Marine GPS Receiver Owner'S Manual Download Page 55

53

6.

You are returned to the last Navigation screen viewed with some 

noticeable changes. If you were viewing the Map screen, you will 

now notice a thick line which is a graphical plot of the 

GOTO

 you 

just created. For other Navigation screens, the header bar 

changes to indicate that you are navigating to a destination. If you 

press 

[ESC]

 until you are viewing the Compass screen, the header 

bar now displays “To: 

(your destination)

”, and all of the 

navigational information is displayed to provide you with the 

necessary details to get you to your destination.

Note:

You can select a 

GOTO

 Destination Waypoint from the other 

Categories. This is covered in the GPS Advanced Operation 

Section (page 96).

Navigating on a GOTO Route

The 

MYSTIC

 has the tools you’ll need to navigate to your destination. You 

have the choice of three customizable screens that display the information 

that you need in the layout that you desire. You may find the compass 

screen perfect for you, or you may prefer the Large Data or Map screen. 

Press 

[ESC]

 until the navigation screen you want is displayed.

If you selected the Map screen, you will see 

your position icon in the center of the screen 

with a line drawn for you on the map, 

graphically displaying the 

GOTO

 route.

Note that this route is line of sight (LOS) or “as 

the crow flies.”

The 

MYSTIC

 does not compute the route 

avoiding hazards or connecting waterways. 

Mystic OM.book  Page 53  Wednesday, October 22, 2003  8:59 PM

Summary of Contents for MYSTIC - Marine GPS Receiver





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands