manualshive.com logo in svg

Uniden MYSTIC - Marine GPS Receiver, Owner'S Manual

Share
Download
Uniden MYSTIC - Marine GPS Receiver Owner'S Manual Download Page 32

30

The Alphanumeric Keypad

1. When you are ready to enter or edit 

data in the Directory or the Channel 

TAG, the alphanumeric keypad opens 

automatically. The very top of the 

keypad window shows the field you 

are entering, with the cursor at the first 

position.

2. You can now use 

STWX

 to select 

the character you wish to enter. With 

the character highlighted, press 

[ENTER]

 and the character is 

appended to the name displayed in the 

field at the top.

Note:

There are letters, numbers, and 

special characters available on the keypad.

z

To shift from uppercase to lowercase or from lower case to 

upper case characters, highlight the 

Shift

 button, and 

press 

[ENTER]

.

z

To move the cursor back one position, erasing the last 

character entered, highlight the 

Back

 button and press 

[ENTER]

.

z

To add a space to the Name, highlight the button between 

Shift

 and 

Back

, and press 

[ENTER]

.

z

To erase the whole Name and start over, highlight the Clear 

button and press 

[ENTER]

.

3. When you have the field data entered the way you want it, 

highlight 

OK

 and press 

[ENTER]

 to accept the entry. The entry is 

now saved, and you are returned to the previous menu. If you do 

not want this entry, press 

X

 to move the highlight to the 

Cancel

 

box and press 

[ENTER]

.

Mystic OM.book  Page 30  Wednesday, October 22, 2003  8:59 PM

Summary of Contents for MYSTIC - Marine GPS Receiver





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands