Uniden GDVR 4A Series Owner'S Manual Download

Page: 49 / 86

Select

Trigger

for the camera you want to set. The

Trigger

screen for that

channel displays.

See page 44 for a detailed description of the trigger screen.

Other Alarm Icon

FIelD

DescrIptIon

alarm Type

Select one of the following from the drop-down menu:
• hard Disk Full

• Network Address Conflict

• Disconnection

• hDD Attenuation Warning

• Disk Loss

Buzzer

The system emits 2 long beeps when an alarm occurs (Not

available on all models.)

Email

When enabled and an alarm is triggered, the system

sends information relevant to the alarm (alarm event,

device name, etc.) to the user-specified mailbox.

To alarm Out

When enabled, triggers will send an alarm to the specified

alarm output.

Disk shortage

alarm

Select a minimum disk capacity to trigger a Disk Shortage

Alarm.

Summary of Contents for GDVR 4A Series























































































Search results

Summary of Contents for GDVR 4A Series

Reviews:

Related manuals for GDVR 4A Series

Brands by name

Popular brands

Uniden GDVR 4A Series, Owner'S Manual

Search results

Summary of Contents for GDVR 4A Series

Reviews:

Related manuals for GDVR 4A Series

Brands by name

Popular brands