Uniden GDVR 4A Series Owner'S Manual Download

Page: 22 / 86

aBout screen

On the

Device List

screen, tap on the menu icon (top left corner) to reveal

menu options, About, Recordings, Snapshots and Logout.
Tap the option,

about

. It displays the latest firmware version.

recordinGs screen

On the

Device List

screen, tap on the menu icon (top left corner) to reveal

menu options, About, Recordings, Snapshots and Logout.
Tap the option,

Recordings

, to view the recordings that have been initiated on

the app. Please note, these recordings are NOT stored on the hard disk.

reMote PlaYBacK screen

On the app, in the live view, tap the

Playback

icon to get the

Remote Playback

screen displayed.

Tap the date displayed on the top right corner of the screen to get the

select

Date

pop-up box. Tap to scroll through the dates and select the dates that you

want to play the recorded video.

Summary of Contents for GDVR 4A Series























































































Search results

Summary of Contents for GDVR 4A Series

Reviews:

Related manuals for GDVR 4A Series

Brands by name

Popular brands

Uniden GDVR 4A Series, Owner'S Manual

Search results

Summary of Contents for GDVR 4A Series

Reviews:

Related manuals for GDVR 4A Series

Brands by name

Popular brands