Uniden EXAI398 Series Owner'S Manual Download | Manualshive

Page: 51 / 56

background image

www.uniden.com

A D D I T I O N A L I N F O R M A T I O N

[ 51 ]

ADDITIONAL

INFORMA

TION

I.C. Notice

TERMINAL EQUIPMENT

NOTICE

: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is

confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was
performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does
not imply that Industry Canada approved the equipment.

NOTICE

: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment itself. The REN

assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected
to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the
requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five.

RADIO EQUIPMENT

The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device. “Privacy of
communications may not be ensured when using this telephone”.

EXAI398 2/5/3 4:12 PM Page 51

«
...
49
50
51
52
53
...
»

Summary of Contents for EXAI398 Series

























































Reviews:

No comments

Related manuals for EXAI398 Series

OpenScape CP600

Brand: Unify Pages: 32

OpenScape CP700

Brand: Unify Pages: 24

OpenScape CP200

Brand: Unify Pages: 2

OpenScape CP600

Brand: Unify Pages: 2

OpenScape Desk Phone IP 35G

Brand: Unify Pages: 130

Brand: Unify Pages: 2

Brand: Unifat Technology Pages: 6

Brand: Olympia Pages: 28

SpectraLink 8002 Series

Brand: Polycom Pages: 72

Brand: J-3 International Holding Co. Pages: 5

Brand: Truper Pages: 28

Brand: Clarity Pages: 26

Brand: VTech Pages: 7

Brand: Alcate Pages: 17

Brand: Uniden Pages: 36

PowerTel 580 Combo

Brand: Amplicom Pages: 57

Brand: Aristel Pages: 50

Brand: Philips Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands