manualshive.com logo in svg

Uniden EXAI398 Series, Owner'S Manual, Page: 46 / 56

Share
Download
Uniden EXAI398 Series Owner'S Manual Download Page 46

www.uniden.com

A D D I T I O N A L I N F O R M A T I O N

[ 46 ]

Symptom 

The Caller ID does not display.

The answering system does 
not work.

Cannot record any messages.

Messages are incomplete.

After a power failure, the outgoing
message is deleted.

No sound on the base unit speaker
during call monitoring or message
playback.

Cannot access remote call-in
features from another touch-tone
phone.

If you still have a problem.

Suggestion 

•

The handset was picked up before the second ring.

•

The call was placed through a switchboard.

•

Call your local telephone company to verify your Caller ID service is current.

•

Make sure the base unit is plugged in.

•

Make sure the answering system is turned on.

•

Set the record time to either the one minute or four minute option.

•

The memory may be full. Delete some or all of the saved messages.

•

The incoming messages may be too long. Remind callers to leave a 
brief message.

•

The memory may be full. Delete some or all of the saved messages.

•

Record your personal outgoing message again. The default message should remain.

•

Adjust the speaker volume on the base unit.

•

Make sure you're using the correct PIN code.

•

Make sure that the touch-tone phone you're using can transmit the tone for at
least two seconds. If it cannot, you may have to use another phone to access your
messages.

•

Call our customer hotline at 1-800-297-1023.

EXAI398  2/5/3 4:12 PM  Page 46

Summary of Contents for EXAI398 Series

























































Reviews:

No comments