Uniden EXAI398 Series, Owner'S Manual, Page: 22 / 56

www.uniden.com
[ 22 ] M E M O R Y D I A L I N G
Memory dialing from Talk Mode
1) Press talk/flash . “
Talk
” and the volume
setting appears.
2) Press mem .
3) Enter a number ( 0 - 9 ) to select the memory location of the desired
phone number. The selected phone number is displayed. Then the
number is dialed.
4) To hang up, press end .
Talk Talk
Volume High
Talk 0:00
Talk 0:35
0123456789012
Chain Dialing
The memory locations on the handset are not limited to phone numbers. You can also store a
group of numbers (up to 20 digits) that you need to enter once your call connects. This is
referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank, and are prompted
to enter the account number, simply press
mem and the location number where the special
number has been stored.
Store your special number with an identifying name. (Refer to “Storing Phone Numbers and
Names” on page 18.)
If you select a memory
location that does not
have a stored number, an
error tone sounds and
the phone will not dial.
EXAI398 2/5/3 4:12 PM Page 22