Uniden EXAI398 Series Owner'S Manual Download | Manualshive

Page: 47 / 56

background image

www.uniden.com

A D D I T I O N A L I N F O R M A T I O N

[ 47 ]

ADDITIONAL

INFORMA

TION

Case

If the handset or base is exposed
to moisture or liquid, but only
affects the exterior plastic housing.

If moisture or liquid has entered
the plastic-housing (i.e. liquid can
be heard in the phone or liquid has
entered the handset battery
compartment or vent openings on
the base).

Action

Wipe off the liquid and use as normal.

Handset:
1. Remove the battery cover and leave it off for ventilation.
2. Remove the battery pack by disconnecting.
3. Leave the battery cover off and the battery pack disconnected for at least 3 days.
4. Once completely dry, reconnect the battery pack and the battery cover.
5. Recharge the handset’s battery pack for 20 hours on the base unit before using the phone.

Base:
1. Disconnect the AC adapter from the base unit, cutting off electrical power.
2. Disconnect the telephone cord from the base unit.
3. Let dry for at least 3 days.

IMPORTANT:

You must

unplug the telephone line while recharging the battery pack

to avoid charge

interruption.

CAUTION:

DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the
handset, base and the microwave oven.

After following these steps, if your cordless telephone does not work, please send to:
Uniden America Corporation
Parts and Service Division
4700 Amon Carter Blvd.
Ft. Worth, TX 76155
1-800-554-3988. Monday through Friday
8 a.m. to 5 p.m. CST

Liquid Damage

Moisture and liquid can damage your cordless phone. In case of accidental submersion, please read the following steps.

EXAI398 2/5/3 4:12 PM Page 47

«
...
45
46
47
48
49
...
»

Summary of Contents for EXAI398 Series

























































Reviews:

No comments

Related manuals for EXAI398 Series

Brand: Uniden Pages: 49

Brand: BellSouth Pages: 34

Brand: Uniden Pages: 64

Brand: AT&T Pages: 35

Brand: Alcatel Pages: 46

Brand: VTech Pages: 38

Brand: BELGACOM Pages: 34

Forum phone 320

Brand: BELGACOM Pages: 37

Brand: Yealink Pages: 24

Brand: AEG Pages: 84

Brand: Aristel Pages: 67

Brand: Nokia Pages: 6

Brand: Nokia Pages: 20

Brand: Panasonic Pages: 11

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 15

EY4542 - CIRCULAR SAW 14.4V

Brand: Panasonic Pages: 15

Brand: Panasonic Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands