A D D I T I O N A L I N F O R M A T I O N [ 5 2 ]
w w w . u n i d e n . c o m
Liquid Damage
Moisture and liquid can damage your cordless phone and outdoor sensor. In case of accidental submersion, please follow
these steps.
Case
Action
If the handset, base or outdoor sensor is
exposed to moisture or liquid, but it only
affects the exterior plastic housing.
Wipe off the liquid, and use as normal.
If moisture or liquid has entered the
plastic housing (i.e., liquid can be heard
in the phone or liquid has entered the
handset battery compartment or vent
openings on the base).
Handset and Outdoor sensor:
1.Remove the battery cover and leave it off for ventilation
2.Remove the battery pack by disconnecting
3.Leave the battery cover off and the battery pack disconnected for at least 3 days
4.Once the handset is completely dry, reconnect the battery pack and the battery cover.
5.Recharge the handset's battery pack for 20 hours before using again (only for the handset).
Base:
1.Disconnect the AC adapter from the base unit, cutting off electrical power.
2.Disconnect the telephone cord from the base unit.
3.Let dry for at least 3 days.
IMPORTANT:
You must
unplug the telephone line while recharging the battery pack
to
avoid charge interruption.
CAUTION:
DO NOT use a microwave oven to speed up the drying process. This will cause permanent
damage to the handset, base and the microwave oven.
After following these steps, if your cordless telephone does not work, please send to:
Uniden America Corporation
Parts and Service Division
4700 Amon Carter Blvd.
Ft. Worth, TX 76155
1-800-554-3988, Monday through Friday
8 a.m. to 5 p.m. CST
A
DDI
T
I
ONA
L
IN
F
O
R
M
A
T
IO
N
UP033BH_EXI7246C.book Page 52 Wednesday, June 2, 2004 1:30 PM
