[ 3 5 ] U S I N G Y O U R E W C 1 9 3 6
w w w . u n i d e n . c o m
Reading the Weather Data from the Handset
You can check the temperature, humidity and weather forecast from the handset.
1) With phone in standby or talk mode, press the
key on the
handset. The display flashes
% QP PG E VK P I
; the data from the base
appears on the handset display for ten seconds.
2) To return to standby mode or talk mode, press the
key.
Making Calls from Speed Dial Memory
1) Press the
mem
key. The handset displays your programmed speed
dial number.
2) Enter the number (
0
-
9
), or press the
/vol/
or
/vol/
key to select the speed dial number you would like to dial.
3) Press the
talk/flash
key.
6CNM
and the number selected appear on
the display. Then the displayed number is dialed.
To cancel speed dialing
Press the
end
key to cancel speed dialing. The handset returns to standby mode.
Also, if the handset is idle (e.g., no key is pressed) for 30 seconds, the phone returns to
standby mode.
Outdoor:78.8F 73%
Indoor :75.2F 48%
Forecast:Cloudy
•If the handset can't
receive any data for
five seconds, an error
tone sounds and the
handset returns to
standby mode.
•If the base can't
received weather data
from the outdoor
sensor, appears on the
handset display.
•You can receive the
weather data even
while in talk mode.
note
US
I
NG YO
UR EWC19
36
UP033BH_EXI7246C.book Page 35 Wednesday, June 2, 2004 1:30 PM
