[ 1 1 ] G E T T I N G S T A R T E D
w w w . u n i d e n . c o m
D. Wall Mounting the Outdoor sensor
Be sure to mount the outdoor sensor on a wall of outside your house. The outdoor sensor may
not receive the outdoor temperature and humidity without appropriately mounting. The
followings are cautions you should consider when mounting the outdoor sensor.
• Avoid electrical cables, pipes, or other items behind the mounting location that could
cause a hazard when inserting screws into the wall.
• Make sure the wall material is capable of supporting the weight of the outdoor sensor.
• Use # 10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable for the
wall material where the wall mount holder unit will be placed.
1) Thread a screw through two kinds of washers in accordance with the order as shown.
2) Insert the screw with the two washers into the wall with a little
looseness to fix the upper hole of the wall mount holder as shown.
3) Thread the other screw through two kinds of washers with the same
order in step 1, and then insert it into the lower hole of the wall
mount holder as shown.
4) Tighten both upper and lower screws using a screwdriver.
5) Insert the outdoor sensor in the wall mount holder.
1
2
3
GE
TTING ST
ARTED
UP033BH_EXI7246C.book Page 11 Wednesday, June 2, 2004 1:30 PM
