Uniden ELITE 8855 Series Owner'S Manual Download Page 16

Page: 16 / 96

Connect the expansion handset's charger

The handset is powered by a rechargeable

battery pack. The battery recharges

automatically when the handset is placed

in the charger.

1) Connect the AC adapter to the

jack

and to a standard 240V AC wall outlet.

2) Set the charger on a desk or tabletop, and

place the handset in the charger with the

screen facing forward.

3) Make sure that the

LED illuminates.

If the LED does not illuminate, check to see

that the AC adapter is plugged in and the

handset makes good contact with the

charger charging contacts.

4) Charge the handset battery pack for at least

15-20 hours before using your new cordless

telephone for the first time.

Handsets supplied with the phone are registered to the base by the factory. Pre-

registered handsets display a handset ID number. Handsets that have not been

registered display

in the LCD.

will

also appear in the sub LCD of a flip handset that has not been registered.

When you register an extra handset to the base, the handset ID will be assigned. Only one

handset can be registered at a time.

DC IN 9V

charge

Register the Handset

MUST place handset in base to register! Models may vary,

refer to Owners Manual for help

Handset must be registered

Use only the

supplied AAD-600S

AC adapter. Do not

use any other AC

adapter.

[13]

Summary of Contents for ELITE 8855 Series

































































































Search results

Summary of Contents for ELITE 8855 Series

Reviews:

Related manuals for ELITE 8855 Series

Brands by name

Popular brands

Uniden ELITE 8855 Series, Owner'S Manual

Search results

Summary of Contents for ELITE 8855 Series

Reviews:

Related manuals for ELITE 8855 Series

Brands by name

Popular brands