Uniden ELITE 8855 Series, Owner'S Manual

Page: 13 / 96

Connect the base and charge the handset
High Speed Internet
1) Connect the AC adapter to the
jack. Place the base close to the AC outlet to
avoid long extension cords.
2) Connect the AC adapter to a continuous
power supply (i.e., an outlet that is not
controlled by a switch).
3) Close the handset and place it in the base
with the smaller LCD screen facing forward.
4) Make sure that the LED illuminates.
If the LED does not illuminate, check to see that the AC adapter is plugged in and the
handset makes good contact with the base charging contacts.
5)
6) Once the handset battery pack is fully
charged, connect the telephone line cord to
the jack and to a telephone outlet.
If your phone line also has High Speed Internet
please ensure you are using an approved line
filter before connecting the telephone cord.
AC ADAPTER
charge
Charge your handset at least 10 hours before plugging into the phone line.
TEL LINE
!
!
!
!
Use only the
supplied AAD-
8855 AC
ADAPTER. Do not
use any other AC
adapter.
Do not place the
power cord where it
creates a trip
hazard or where it
could become
chafed and create a
fire or electrical
hazard.
Don't place the
base in direct
sunlight or subject it
to high
temperatures. The
battery may not
charge properly.
If your telephone
outlet isn't modular,
contact your
telephone company.
Australia
Tel Line adapter
(supplied)
SETTING
UP
THE
PHONE
[10]
To AC ADAPTER