Uniden DSS7855 Owner'S Manual Download Page 25

Page: 25 / 84

Setting the Message Alert On or Off

Setting the Call Screen

Message Alert sounds an alert tone when you have an unheard message. If you set

Message Alert on, whenever a new message is received, the soft alert tone will sound every

15 seconds. When all messages have been played back, the alert tone automatically

deactivates.
1) Press the

soft key. Select the Answ.

Setup menu, and then the Message Alert submenu.

2) Press

to select

3) Press the

soft key on the base or handset.

You will hear a confirmation tone.

To quickly turn off the Message Alert tone, press any key on the base unit; the tone will

automatically deactivate.

When all new messages are played back using the remote playback feature (see pages 58

to 61),the Message Alert tone will automatically deactivate. The tone will not deactivate until

all new messages are played back.

Call Screen allows you to listen (from the base) to the incoming message being left

by the caller before you answer the call.
1) Press the

soft key.

Select the Answ. Setup menu and then the Call Screen

submenu.

2) Press

to select

3) Press the

soft key. You will hear a confirmation tone.

MENU

Turning the Message Alert tone off by pressing any key

Turning the Message Alert tone off from a remote location

MENU

/volume up/down

Off

BACK

Call Screen

Off

BACK

Message Alert

Off

[24]

GETTING

ARTED

Summary of Contents for DSS7855





















































































Search results

Summary of Contents for DSS7855

Reviews:

Related manuals for DSS7855

Brands by name

Popular brands

Uniden DSS7855, Owner'S Manual

Search results

Summary of Contents for DSS7855

Reviews:

Related manuals for DSS7855

Brands by name

Popular brands