Uniden DSS7855 Owner'S Manual Download Page 26

Page: 26 / 84

For setting the

Day and Time, the

idle time-outs

extended to 2

minutes.

Caller ID on Call

Waiting is

currently

unavailable in New

Zealand.

Global Setup

If you change one of the global settings, you change that setting for all registered

handsets and the base. Only one handset or the base can change global settings at a time.

Day & Time sets the day and time of your display.
1) Press the

soft key. Select the Global Setup menu,

and then the Day & Time submenu option.

of the week, and then the

soft key.

3) Press the

soft key.

You will hear a confirmation tone.

Setting Day and Time

MENU

2) Press

to select the day

3) Press

to set hour, and then the

soft key

4) Press

to set minute, and then the

soft key

5) Press

to choose

and then the

soft key.

You will hear a confirmation tone.

Caller ID on Call Waiting (CIDCW) displays the name and number of an incoming call while

you are on the line.

1) Press the

soft key. Select the Global Setup menu,

and then the CIDCW submenu.

2) Press

to select

SAVE

MENU

/volume up/down

PM,

Off

Setting Caller ID on Call Waiting (CIDCW)

BACK

Day

Time

MOM 12:00 AM

[ / ]

SAVE

[25]

BACK

CIDCW

Off

Summary of Contents for DSS7855





















































































Search results

Summary of Contents for DSS7855

Reviews:

Brands by name

Popular brands

Uniden DSS7855, Owner'S Manual

Search results

Summary of Contents for DSS7855

Reviews:

Brands by name

Popular brands