Uniden DSS7855 Owner'S Manual Download Page 3

Page: 3 / 84

Congratulations on your purchase of the Uniden Digital Expandable Cordless Telephone

System! When the base unit is connected to AC power and a telephone line, it can support

up to 10 cordless handsets. The DSS7855 model includes one handset, the 1

model includes 2 handsets and the 2 model includes 3 handsets. You can now

place a fully- featured cordless handset anywhere in your home or office where AC power is

available to connect the handset chargers. Extra handsets also allow you to establish a 4-

way conference call among two handsets, the base speakerphone, and an outside line.

5.8GHz Digital Expandable

Integrated Answering Device

Dual Keypad with LCD Screen at Base

10 Multi-Handset Expandability

Hands-Free Duplex Speakerphone at Handsets and Base

Caller ID*/Caller ID on Call Waiting (subscribe through local telephone company)

100 Programmable Memory Locations

Intercom/Call Transfer Between Handsets**

20 Distinctive Ring* Options (10 Tones/10 Melodies)

Mute/Hold Features

Do Not Disturb (DND)

Room/Baby Monitoring**

Battery Level Indicator

Clock Display

Animation Displays

Caller ID, Distinctive Ring features require subscription to the Caller Display service

from your network supplier. A fee normally applies for this.

Caller ID on Call Waiting currently only available in Australia.

** Requires the use of multiple handsets.

Note: Some illustrations in this manual may differ from the actual unit for

explanation purposes.

Welcome

Features

[2]

Summary of Contents for DSS7855





















































































Search results

Summary of Contents for DSS7855

Reviews:

Brands by name

Popular brands

Uniden DSS7855, Owner'S Manual

Search results

Summary of Contents for DSS7855

Reviews:

Brands by name

Popular brands