87
6.
Enter the new frequency you wish to start at then press
HOLD
to set the new starting
frequency.
7.
Press
HOLD
again to release hold mode and start searching. Then see Searching.
8.
Press
SCAN/SEARCH
to exit.
Searching (only, not Search with Scan)
1.
To start a search see Quick Search, Service Search, or Custom Search.
2.
To toggle search bands on or off for custom searches press the number key of the custom
search.
3.
To access (1) search using the programmed search keys press
then the search key
1(srch 1)
,
2(srch 2)
, or
3(srch 3)
to start searching.
4.
To change search direction or continue searching turn the scroll control back or forward.
5.
To hold on a frequency press
HOLD
. Press
HOLD
to resume.
6.
To step through the frequencies turn the scroll control.
7.
Press
HOLD
to resume.
8.
To store a frequency press
HOLD
to hold on the frequency.
9.
Then see Storing a Displayed Frequency.
10. To toggle the lockout status of a frequency press
L/O
.
11. To turn Intermediate Frequency Exchange on or off press
HOLD
to hold on the frequency
then press then
4(IFX)
. Press Hold to resume.
12. To turn the attenuator on or off for each custom or service search press then press
7(ATT)
. (Press and hold
7(ATT)
for global attenuation).
13. To check for a repeater frequency press
HOLD
to hold on the frequency.
14. Press then press and hold
8(REV)
. Press Hold to resume.
15. To toggle modulation for a search press
HOLD
to hold on each search.
16. Press
7(ATT)
then
9(MOD)
. Press
HOLD
to resume.
17. To toggle Close Call modes press
SQ
( ).
18. To review and unlock search frequencies press then
L/O
.
19. To unlock all frequencies of all search/close call ranges Hold on any search and press and
hold
L/O
.
Storing a Displayed Frequency (while searching)
To store a displayed frequency into an existing group:
1.
Quickly press
E/
.
2.
At ‘Quick Freq Save?’ press
.No
.
3.
At ‘Select System’ scroll to the system where you want to store the frequency and press
E/
.
4.
At ‘Select Group’ scroll to the group where you want to store the frequency and press
E/
.
After storing the frequency, you will be at the ‘Edit Channel’ menu to complete the settings for the
new channel.
If you don’t want to edit the channel settings or are done editing the channel, press
L/O
to return
to searching.
