67
While in Review Location Mode:
1.
To Select a Location turn the scroll control.
2.
To Return to ‘GPS Display’ Mode press
MENU
.
3.
To Overwrite and Store the Current Location press and hold
GPS
for 2 seconds.
4.
To Edit the Current Location press
E/
.
5.
To Toggle the Lockout Status of the Location press L/O to toggle ‘Temporary L/O, Locked
Out, and Unlocked’.
6.
To Unlock all Locations of the Current type (POI, DXG, or DRD) press and hold
L/O
.
7.
To Unlock all Locations of All types press
E/
then press and hold
L/O
.
8.
To Return to Scan mode press
SCAN/SEARCH
.
PRIORITY/PRIORITY ID/PRIORITY
PLUS SCAN
Priority Scan
When the scanner is scanning a conventional system, it interrupts scanning (based
on the priority check interval setting) to check priority channels for activity. The more channels
you have set to priority, the longer the interruption will be. The scanner is unable to scan over
100 priority channels at once. The quick keys for the system(s) and group(s) containing the
priority channel(s) have to be enabled (and unlocked) or the scanner will display ‘Priority Scan No
Channel’.
Priority Plus Scan
the scanner only scans priority channels in (unlocked) conventional systems
with system and group quick keys enabled.
The highest priority is for channels in system/site and group quick key 1. The lowest priority is for
channels in system/site quick key 90 and group quick key 0. Priority for priority channels in the
same channel group follows the order in which the channels were created.
Priority ID Scan
this function is similar to conventional priority although there is no interruption
during the transmission. Priority ID Scan is always on for a system if enabled in the system
setting. Priority is checked in between transmissions, when the scanner is receiving the control
channel, and during the channel delay period. The scanner can only look for priority IDs in the
trunked system it is currently scanning.
Preemptive Priority
preemptive priority is a feature that works on Motorola systems. If the
Motorola system has priority channels, and you assign one of those TGs as priority in the scanner,
then when one of those channels becomes active, the scanner will jump to it even if it is on a
different system voice channel (i.e. it preempts your current reception). This feature relies on the
system itself having talkgroups assigned as priority (so the active channel information is included
on voice channel low-speed data). If a talkgroup you assign as priority is not also a priority
channel on the transmitting system, then the scanner will use standard trunking priority for the
talkgroup.
To Use Priority Scan
you must first set your priority channels.
To Use Priority ID Scan
you must also enable Priority ID Scan for each system.
To Edit Priority Scan Options:
1.
Press
MENU
.
2.
Scroll to ‘Priority Scan’ and press
E/
.
3.
Scroll to the options below and press
E/
.
4.
Press
SCAN/SEARCH
to return to scanning when done with editing.
