96
2.
Enter the tone and press
E/
to save and exit.
3.
Scroll to ‘Edit Tone B’ and press
E/
.
4.
Enter the tone and press
E/
to save and exit.
5.
Press
MENU
to return.
6.
Scroll to ‘Set Delay Time’ and press
E/
.
7.
Scroll to one of 3 settings and press
E/
to save and exit.
Off
- the scanner resumes standby as soon as the carrier drops after a page.
1-30
- (seconds): the scanner resumes standby mode after the carrier drops and the
selected time expires.
Infinite
- you must press
HOLD
after a page to resume standby mode.
8.
Scroll to ‘Set Alert’ and press
E/
.
9.
Scroll to ‘Set Alert Tone’ and press
E/
.
10. At ‘Set Tone’ scroll to the alert (Alert 1-9 or Off) and press
E/
.
11. At ‘Set Level’ scroll to ‘Level 1-15 or Auto’ (the scanner sets the alert beep to the master
volume level) and press
E/
.
12. Scroll to ‘Set Alert Light’ and press
E/
.
13. Scroll to Off, Blue, Red, Magenta, Green, Cyan, Yellow, or White and press
E/
.
14. At ‘Set Pattern’ scroll to On, Slow Blink, or Fast Blink and press
E/
.
15. Press
MENU
to return.
16. Scroll to ‘Set Record’ and press
E/
.
17. Scroll to On or Off and press
E/
to save and exit.
18. Press
MENU
to return then scroll to ‘Tone-Out 2’ and repeat to program more tones.
19. Press
MENU
to return.
Using Tone-Out Standby/Search
See Setting up Tone-Out first.
