54
3.
At ‘Set Longitude’ press
E/
. Enter the longitude and press E/ .
4.
At ‘Set Range’ press
E/
.
5.
Enter the range (
0.5
to
125
in 0.5 steps) and press
E/
.
6.
At ‘Set GPS Enable’ press
E/
.
7.
Scroll to On or Off and press
E/
.
8.
Press
MENU
to return.
Set Lockout
determines whether a group will be scanned or not (even if the quick key for the
group is turned on). ‘Temporary L/O’ means until you cycle power. The default setting is Unlocked.
1.
Scroll to ‘Set Lockout’ and press
E/
.
2.
Scroll to ‘Unlocked’, ‘Temporary L/O’, or ‘Lockout’ and press
E/
.
3.
Press
SCAN/SEARCH
or
L/O
to exit.
PROGRAMMING FREQUENCIES/TGIDS
Once you have your Systems built, systems options configured, Sites Created (for trunking
systems), Site Options configured, and Groups Created, you can (finally) program your channels.
QUICKLY STORING A CONVENTIONAL FREQUENCY
To Program a Frequency into a ‘Quick Save Group’ in a ‘Quick Save System’:
1.
In scan mode press
HOLD
to hold on any channel.
2.
Enter the frequency and press
E/
.
3.
At ‘Quick Freq Save?’ press
E/
.
Note: If the frequency is already stored in the group, ‘Frequency Exists Accept? (Y/N)’
appears. Press
.No
to return.
The scanner will save the frequency in a (created) group called ‘Qck Save Grp’ in a (created)
system called ‘Qck Save Cnv Sys’ (with no quick keys assigned) and you will be at the ‘Edit
Channel’ menu to complete the settings for the new channel. If you don’t want to edit the channel
settings or are done editing the channel, press
L/O
to return to ‘Hold’ to enter another frequency
or
SCAN
to exit.
Then see Edit Channel Options, Edit Group Options, and Edit Conventional Systems Options to
customize the channel(s), group, and system.
To Program a Frequency into an Existing Group:
1.
In scan mode press
HOLD
to hold on any channel.
2.
Enter the frequency and press
E/
.
3.
At ‘Quick Freq Save?’ press
.No
.
4.
At ‘Select System’ scroll to the system where you want to store the frequency and press
E/
.
5.
At ‘Select Group’ scroll to the group where you want to store the frequency and press
E/
.
Note: If the frequency is already stored in the group, ‘Frequency Exists’ Accept? (Y/N)’
appears. Press
.No
to return.
After storing the frequency, you will be at the ‘Edit Channel’ menu to complete the settings for the
new channel. If you don’t want to edit the channel settings or are done editing the channel, press
L/O
to return to ‘Hold’ to enter another frequency or
SCAN
to exit.
