Uniden BCD325P2, Owner'S Manual

Page: 31 / 132

31
Top Line
Displays when you press the Func key to select Function Mode in
Any Mode .
Displays and blinks when you press and hold the Func key to lock
Function Mode in Any Mode .
HOLD HOLD
appears in
Hold Mode
.
L/O Appears if the system/site/group/channel/frequency/search/location is
locked out in Hold Mode .
Displays the system number tag and channel number tag (if
programmed) in Function Mode .
PRI PRI appears in priority mode and blinks in priority plus mode in Scan
Mode .
Displays to show the signal strength of the receiving channel or
frequency.
Appears if the keylock is on in Any Mode .
• Appears and blink (with a tone) if the battery is low in Any
Mode .
• GPS appears if the scanner is connected to a GPS device
and receiving a signal in Any Mode .
• shows the battery level when you press Vol in Any Mode .
2nd Line
• shows the name of the currently scanned site or conventional system in
Scan Mode .
• shows the name of the currently searched custom/service search in
Search Mode .
• will alternate the conventional system name and channel group name for
a conventional system in Scan Receive/Hold Modes .
• will alternate the site name and channel group name for a trunking system
in Scan Receive/Hold Modes .
• will alternate the custom search name and system name for a trunking
system for a ‘C-Ch only Search’ in Search Receive/Hold Modes in
display modes 1 and 3.
• will alternate the custom search name and ‘SID’ for a trunking system for
a ‘C-Ch only Search’ in Search Receive/Hold Modes in display mode 2.