Uniden 1588-5 - DECT Cordless Phone Base Station Owner'S Manual Download

Page: 51 / 72

all Mounting the Base

Wall Mounting the Base

This.phone.can.be.mounted.on.any.standard.telephone.wall.plate.

DESK

WALL

(To AC outlet)

Remove the stand

from the base.

Connect the AC adapter and the

telephone cords as shown on pages

9 and 10. Remember to route the AC

adapter cord through the channel on

the bottom of the base.

Plug the telephone

cord into the wall

jack. Route the

telephone cord

through the

molded wiring

channel on the

bottom of the

stand as shown.

Snap the stand

into the notches

marked

WALL

on the bottom of

the base.

Route the AC adapter cord

through the molded wiring

channel on the bottom of

the stand, and let the cord

hang below the stand.

DESK

WALL

Summary of Contents for 1588-5 - DECT Cordless Phone Base Station









































































Search results

Summary of Contents for 1588-5 - DECT Cordless Phone Base Station

Reviews:

Related manuals for 1588-5 - DECT Cordless Phone Base Station

Brands by name

Popular brands

Uniden 1588-5 - DECT Cordless Phone Base Station, Owner'S Manual

Search results

Summary of Contents for 1588-5 - DECT Cordless Phone Base Station

Reviews:

Related manuals for 1588-5 - DECT Cordless Phone Base Station

Brands by name

Popular brands