Wi-Fi phone cannot start.
•
Check whether it is correctly installed
.
•
Check whether battery is fully charged
.
•
Press the power button of Wi-Fi phone
.
•
If it shows no response to that, remove battery,
and install it again.
Before going to Service Center
43
Newly purchased Wi-Fi phone does not work
•
Check whether it is correctly installed.
•
Check whether it is connected to AP.
- refer to 40 page (
Wi-Fi Info)
•
Check whether it shows any error messages when the
power of Wi-Fi phone has been turned off and on.
• Check whether battery is fully charged
The battery is full, but the phone keeps turned off?
•
Separate the battery from the phone, and then, re-fits into
the phone and turn it on.
• It is still turned off? Then, clean a contact part to cradle,
re-fit into the phone and turn it on.
Wi-Fi phone shows “poor call condition” during
calls
•
Check whether it is too far from AP.
.
•
Electric waves might have become weak due to obstacles such
as walls, or electro magnetic disturbance might have taken place.
Turn off the power of AP, and on again in 3 seconds.
•
If volume is low, adjust it properly by using volume key.
WiFi phone has charging troubles
• Check whether it is correctly installed.
• Please clean up WiFi phone and charger interface.
Video screen is not clear and it seems that your
camera lens is not clean.
• Please clean up a camera lens with a soft cloth.
WiFi phone bell does not ring.
• Check whether it is correctly installed.
• Check whether wireless LAN information include the name of
the LAN in Wi-Fi info.
- refer to 40 page
• Check whether WiFi phone battery has been charged.
• Check whether sound setting is No Ring or Etiquette mode.
Summary of Contents for SQ-3500
Page 1: ......
Page 49: ...http www udcsystems com ...
