UniData Communication Systems SQ-3500, User Manual, Page: 37 / 49

WLAN Settings
Wi-Fi Settings .
2. Add profile from AP list
Select add
1) SSID setting: Enter SSID name
2) Security setting: You can configure security to use. (WEP/WPA-PSK/WPA-EAP/WPA2-PSK/WPA2-EAP)
3) Account/Password: You can configure the ID/PWD and Mode(MD5/PEAP/TTLS) for authentication
4) STUN: You can configure server and port of NAT
5) Networking setting : You can set Network DHCP or manually
3. Add profile as Temporary
Select OK or Temp
1) Security setting: You can configure security to use. (WEP/WPA-PSK/WPA-EAP/WPA2-PSK/WPA2-EAP)
2) Account/Password: You can configure the ID/PWD and Mode(MD5/PEAP/TTLS) for authentication
3) STUN: You can configure server and port of NAT
4) Networking setting : You can set Network DHCP or manually
35
If you add a profile as <Temp>, it
means it is connected as temporary
so you should connect to the AP
manually every time when you
connect to the AP if it is not
registered