NERO / NERO INSTANT
Page 74
Version 1.4 / January 2018
ТМ
10.1.1 Status / Errors
Sub-menu
Description
Value
2.1 Status
Display of operational errors
2.1.1 Show error
Shows a list of errors (current and previous) upon entry to the
menu item, indicating the type of equipment, number of fail
-
ures, date and the time of last error, as well as the current state
of error (active or not)
List of errors
2.1.2 Reset error
Resets errors upon entry
2.1.3 Temperature
Shows the temperature of two temperature sensors of SVM-1, which was fitted
with a new Regulator.
This menu item is hidden if the number of snacks is 0 or if there is no temperature
sensor connected to keypad 021 of SVM-1
2.1.4 Voltage DC
Shows the DC voltage on main board (regular reading, when fed from a 220V
source is 32.6V).
This menu item is hidden if the first version of main board is installed
10.1.2 CASH
Sub-menu
Description
2.2 Cash
Machines configurations to handle cash
2.2.1 Manual Coin ln
Upon entry it is allowed to load coins in tubes manually through coin entry slots,
located on the front of the management compartment and loading banknotes to
recharge change availability.
At the same time the LCD shows information regarding the selected tube: denom
-
ination of the loaded coin. Letter “F” indicates that the tube is full.
After recognizing the loaded coins, you will see information about the tube to which
that given coin was deposited
2.2.2 Manual Coin Out
This menu item is hidden if the Machine is in Operator’s menu, but Operator’s
privileges do not give access to coin discharge (privileges are set in technician’s
menu).
In the given mode the LCD shows information about the tube selected for dis
-
charge (withdrawal) of coins: coin denomination, number of coins.
For discharge of one coin from the selected tube press “→”
2.2.3 Bill cash box (provided
if the modem is installed)
When entered sends a simulated stacker emptying signal to the server (collection
signal) in cases when there is no Bank Note Acceptor (BNA), or the stacker sensor
is broken
2.2.4 Print Z-report(s)
This sub-menu position is displayed, but not used
10.1.3 SNACK 1
10.1.4 SNACK 2
The following menu items are meant to configure snack vending machines and are not used for NERO
vending machines.
For proper functioning of the machine, in sub-menu “1.1.12 Snack number” set value to 0. In this case
the menu items “1.7 SNACK 1” and “1.8 SNACK 2” will be hidden.