NERO / NERO INSTANT
Page 25
Version 1.4 / January 2018
ТМ
The machine must be connected to the water supply mains, only by a qualified techni
-
cian!
Any traces of leakage of water show incorrect connection (loose connection) of water
supply or improper supply pressure, beyond the pressure range indicated for the vend-
ing machine!
The vending machine will switch to water supply network operation mode. To switch to the self-con
-
tained water supply mode from the potable water container, perform the described above operations with
the exception of the following:
1. In item 1 select the setting
(Installed)
;
2. In item 5 put the clamp back on the tube (see fig. 4.18);
3. In item 6 turn the switch to the “I” position (see fig. 4.18).
To connect the vending machine to the water supply network, use one set of new gaskets only. Don’t
use the materials repeatedly.
Before connecting the vending machine to the water supply mains: (new connection):
• In accordance with the instruction to the
Configurator
program (see at the website:
www.
unicum.ru
), go to the (
Coffee)
tab and in the
(Water container)
field select
(Not installed)
.
Create the configuration file and place it to the USB flash drive. In accordance with this man
-
ual “load” the file into the vending machine software. Without carrying out this item the rest
items are meaningless (the settings will have no effect).
• Set the switch on the switch board of the machine to position
[O/Off] (
see fig.5.4 pos.2);
• Unplug the machine by removing the plug from the power socket;
• Remove the vending machine’s rear panel by removing the screws;
• Remove the clamp from the silicone tube (see fig. 4.18);
• Turn the switch to the “II” position (see fig. 4.18);
• Fix the rear wall back in its place;
• Plug the power cord into an electrical outlet;
• Set the switch on the switch board of the machine to position
[I/ON]
(see fig.5.4 pos.2).
It is recommended to place the water supply tap (valve) outside the machine’s body at an easily acces
-
sible spot.
Fig.4.18
Clamp
