g)
Carry out the Machine Checking Procedure (Section 2) to ensure that the system is
fully operational.
3.4.9 LCD
See Fig 3-1 (11)
a)
Disconnect the LCD cable from the Multivend Controller board. Please take note of the
orientation of the cable when removing it.
b)
Unscrew and remove the fourteen screws that secure the coloured support structure
to the door from behind the Coin Track assembly, moving cables as necessary, and
gently pull the coloured support structure free.
c)
Remove the four screws retaining the LCD to the door - the LCD is now free.
d)
Replace the LCD and re-tighten the four screws.
e)
Replace the coloured support structure and re-tighten the fourteen screws.
f)
Reattach the LCD cable on the Multivend controller board. Be sure to insert the cable
in the same orientation it was removed as noted in step (a).
g)
Carry out the Machine Checking Procedure (Section 2) to ensure that the system is
fully operational.
3.4.10 Display window
See Fig 3-4 (14)
a)
Unscrew and remove the fourteen screws that secure the coloured support structure to
the door from behind the Coin track assembly, moving cables as necessary, and gently
pull the coloured support structure free.
b)
Remove the old LCD window out of its aperture (this may be glued in place).
c)
Slide a new window with its thicker edge toward the bottom of the door into position
and glue in place.
d)
Refit the coloured support structure and re-tighten the fourteen screws.
3.4.11 Lock
See Fig 3-1 (8) and 3-3 (8)
a)
With the door open, turn the key to the locked position and remove the key.
b)
Unscrew and remove the small brass nut that holds the plastic locking cam in place.
Remove the cam.
c)
Behind the plastic cam is a tiny metal shaped washer which should have its lobe to the
left (provided the key has been removed). Remove this metal shaped washer.
d)
Unscrew and remove the large brass nut holding the lock in place and remove it
together with the lock backing plate.
e)
Remove the lock from the front of the door.
Summary of Contents for Multivend
