d)
Carry out the Machine Checking Procedure (Section 2) to ensure that the system is
fully operational.
3.4.6 Reject chute
See Fig 3-1 (17)
a)
Remove the screw holding the reject chute top, then remove the two screws fixing the
reject chute bottom to the coloured support structure.
b)
Replace the reject chute top and bottom, fixing it into the machine by reversing the
step above.
c)
Carry out the Machine Checking Procedure (Section 2) to ensure that the system is
fully operational.
3.4.7 Coin sorter
See Fig 3-1 (15)
a)
Remove the screw holding the reject chute top, then remove the two screws fixing the
reject chute bottom to the coloured support structure.
b)
Unplug the coin sorter ribbon cable from the coin sorter or the Multivend Controller
board depending to whether the ribbon cable is being replaced.
c)
Slide the coin sorter down toward the bottom of the door which will release it from
the metal brackets.
d)
Replace the coin sorter with the new unit, fixing it into the machine by reversing the
step above.
e)
Reattach the reject chute bottom and cover to the coloured support structure.
f)
Plug in the coin sorter ribbon cable to the coin sorter and Multivend Controller board.
g)
Carry out the Machine Checking Procedure (Section 2) to ensure that the system is
fully operational.
3.4.8 Main window and push buttons
See Fig 3-4 (13) and (18)
a)
Remove the ten Product and Price Cards from behind the window.
b)
Unscrew and remove the fourteen screws that secure the coloured support structure
to the door from behind the Coin Track assembly, moving cables as necessary, and
gently pull the Coin Track together with the coloured support structure free.
c)
The window and buttons assembly and the mask can now be removed and replaced.
retain the buttons for fitment to the new window
d)
Individual button assemblies can be removed and replaced.
e)
Replace the coloured support structure and re-tighten the fourteen screws.
f)
Replace the Product and Price Cards in the correct locations.
Summary of Contents for Multivend
