Unicont SPb Ltd
Technical Documentation ADPC-101
Page 13
logic ‘0’
denotes that the contact is opened
logic ‘1’
denotes that the contact is closed.
The unit will be in this mode until operator initiates exit by pressing on any key.
7.
Additional displaying modes
7.1
Total trip displaying
In this mode display shows total trip of a ship after last nulling of total trip counter.
Nulling except after shutdown of converter or with pressing
[7]
key by operator. After activating
this mode upper string of display with log information changed to string with information about
haul.
To go into this mode press on
[F2]
key. To go out from this mode press on
[F2]
key
again.
NMEA data output in this mode does not stop or change.
7.2
Displaying of ROT (rate of turn)
In this mode display shows current rate of turn of a ship. After activating this mode
lower string of display with current heading information changed to string with information
about ROT.
To go into this mode press on
[3]
key. To go out from this mode press on
[3]
key again.
8.
Menu functions and changing of settings
Press on
[F3]
key and enter menu of settings. Use
[3], [0]
keys (up and down) for
scrolling between options.
Use
[6], [8]
keys (left, right) to select probable option values.
Again press on
[F3]
key for exit from selected mode. Selected options are stored only
after pressing on
[ENTER]
.
When operator is idling and
unuse timeout
option is selected (in positions 5s, 10s, 15s,
20s, 25s except for OFF) an automatic exit from the menu is initiated without changes of any
option.
