background image

 

1. LICENSE GRANT

 

In connection with the transfer of possession of the software package 

provided with this Agreement, 

Unication,

 (LICENSOR) hereby grants to pos-

sessor (LICENSEE) a non-exclusive license to use the software program(s) 
(SOFTWARE) and documentation (DOCUMENTATION) of said software 
package with a single-user computer system. LICENSEE may, upon request-
ing and receiving written permission of LICENSOR, transfer possession of the 
software package including SOFTWARE and DOCUMENTATION and trans-
fer this license to another party if the other party agrees in writing to accept 
the terms and conditions of this agreement

 

2. OWNERSHIP

 

LICENSEE is given possession of a program module(s) with the software 

package in or on which Software is copied, but title to the SOFTWARE and 
DOCUMENTATION, all copies thereof and all rights therein, including all 
rights in the patents, copyrights, and trade secrets applicable thereto, shall 
remain vested in LICENSOR, regardless of the form or media in or on which 
the original and other copies of software and documentation may subsequently 
exist. Nothing contained herein shall be deemed to convey any title or owner-
ship interest in the program module(s), SOFTWARE or DOCUMENTATION 
to LICENSEE.

LICENSEE agrees not to disclose, transfer, provide on any form, except 

as otherwise provided in this agreement, the software package or any portion 
thereof, to any person other than employees of LICENSEE without prior 
written consent of LICENSOR, and any such disclosure or transfer shall be 
consistent with the use in the single-user computer system.

LICENSEE agrees not to reverse compile or disassemble SOFTWARE.

LICENSEE agrees that it will not in any form, export, re-export, resell, 

ship, or divert or cause to be exported, re-exported, resold, shipped, or diverted, 
directly or indirectly, the SOFTWARE and DOCUMENTATION or a direct 
product thereof to any country for which the United States government or any 
agency thereof at the time of export or re-export requires an export license or 
other government approval without first obtaining such license or approval.

 

3. COPYING RIGHTS

 

LICENSEE may make copy(s) of SOFTWARE and DOCUMENTATION, 

required for backup or modification purposes in support of the use of the 
SOFTWARE with the single-user computer system, but LICENSEE must 
include existing copyright notices on any such copy, modifications, or portion 
of SOFTWARE merged into another program. Such notice(s) may appear in 
several forms, including machine-readable form, and LICENSEE agrees to 
reproduce such notice(s) in each form in which it appears, to the extent it is 
physically possible to do so. 

 

4.TRANSFERABILITY

 

LICENSEE may not transfer SOFTWARE and DOCUMENTATION, or 

any copy(s) thereof, in whole or in part, except as expressly provided in this 
agreement. If Licensee transfers SOFTWARE and DOCUMENTATION to 
another party as expressly provided in this agreement, LICENSEE must at 
the same time either transfer all copies whether printed or machine-readable 
form to the same party or destroy any copies not transferred; this includes all 
modifications and portions of SOFTWARE contained or merged into another 
program.

If LICENSEE transfers SOFTWARE and/or DOCUMENTATION or any 

copy, modification, or merged portion of SOFTWARE to another party without 
written permission of LICENSOR, this license is automatically terminated.

 

5. TERM

 

The term of this license agreement is for as long as LICENSEE uses the 

SOFTWARE for its intended purpose. This agreement may be terminated by 
LICENSEE upon one month’s prior written notice. LICENSOR may terminate 
this agreement if LICENSEE is in default of any of the terms and conditions 
of this agreement, and termination is effective if LICENSEE fails to correct 
such default within thirty (30) days after written notice thereof by LICENSOR.

Within one month after termination of this agreement, LICENSEE will 

certify to LICENSOR in writing that through its best efforts, and to the best 
of its knowledge, the original and all copies, in whole or in part, in any form, 
of the SOFTWARE and DOCUMENTATION have been destroyed or returned 
to LICENSOR.

 

6. ASSIGNMENT, SUBLICENSE, OR TRANSFER

 

LICENSEE  shall not (by contract, operation of law, or otherwise) assign, 

sublicense under or transfer this agreement for any right of interest in this 
agreement, or delegate performance of any of its obligations under this 
agreement, without the prior written consent of the LICENSOR. Any such 
assignment, sublicense, transfer, or delegation without the LICENSOR’s prior 
written consent shall be voidable at the LICENSOR’s option.

 

7. WARRANTY AND MAINTENANCE

 

LICENSOR warrants that under normal use, SOFTWARE shall perform 

the functions specified in its DOCUMENTATION. If SOFTWARE does not 
conform to its DOCUMENTATION such that its functional performance is 
significantly affected and LICENSOR is notified promptly, in writing, within 
ninety (90) days from the date of shipment of the software package, LICEN-
SOR will correct such nonconformance by repair, or at its option, make 
available a replacement program module(s) providing there is no misuse of the 
nonconforming program module(s).

If LICENSOR or its distributor is unable to deliver a replacement 

module(s) having SOFTWARE which conforms substantially to its DOCU-
MENTATION, LICENSOR may terminate this license by providing a refund 
to LICENSEE upon LICENSEE’s return of such program modules, except as 
provided in Section 3 above, any modification in SOFTWARE by LICENSEE 
or third parties shall void this warranty.

LICENSOR does not represent or warrant that the SOFTWARE or 

DOCUMENTATION furnished hereunder is free of infringement of any of the 
third parties, copyrights, trade secrets, or other intellectual property rights.

LICENSOR shall not be responsible for maintenance or field service of 

the program module(s) and SOFTWARE under this agreement.

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU 

OF ALL OTHER WARRANTIES WHETHER STATUTORY, EXPRESS OR 
IMPLIED (INCLUDING ALL WARRANTIES OF MERCHANTABLILITY 
AND FITNESS FOR A PARTICULAR PURPOSE AND ALL WARRANTIES 
ARISING FROM COURSE OR DEALING OR USAGE OF TRADE) WITH 
RESPECT TO THE PROGRAM MODULE(S), SOFTWARE, OR DOCUMEN-
TATION FURNISHED BY LICENSOR UNDER THIS AGREEMENT OR 
ANY USE OF SUCH SOFTWARE OR DOCUMENTATION BY 
THE LICENSEE.

The remedies provided above are the LICENSEE’s exclusive remedies 

for any failure of LICENSOR to meet its warranty obligations. Actions by 
LICENSOR in the manner provided above shall constitute complete fulfill-
ment of all the warranty liabilities of LICENSOR whether the claims of the 
LICENSEE are based on contract, in tort (including negligence and strict 
liability, or otherwise with respect to or arising out of the program module(s), 
SOFTWARE or DOCUMENTATION furnished hereunder.

 

8. LIMITATION OF LIABILITY

 

LICENSOR, its subcontractors and suppliers of any tier, shall not be 

liable in contract, in tort (including negligence and strict liability), or otherwise 
for damages or loss of other property or equipment, loss of profits or revenue, 
loss of use of equipment or power system, cost of capital, cost of purchased or 
replacement power or temporary equipment (including additional expenses 
incurred in using existing facilities), claims of customers of the LICENSEE, 
or for any special, indirect incidental or consequential damages whatsoever.

The remedies of the LICENSEE set forth herein are exclusive where so 

stated and the total cumulative liability of the LICENSOR with respect to this 
agreement, or anything done in connection therewith, whether in contract, in 
tort (including negligence and strict liability) or otherwise, shall not exceed 
the price of the product in which such liability is based.

 

9. NOTICE 

 

All notices in connection with this agreement shall be in writing and 

shall be given by certified mail, return receipt requested, at the following 
address: 

Unication,

 Inc., 1500 Gateway Blvd., Boynton Beach, FL 33426-8292, 

ATTENTION: Group Patent Counsel.

 

10, GOVERNING LAW

 

This agreement shall be governed and interpreted by the laws of the state 

of Illinois.

 

11.AGREEMENT

 

LICENSEE ACKNOWLEDGES THAT THIS AGREEMENT HAS 

BEEN READ AND UNDERSTOOD AND AGREES TO BE BOUND BY ITS 
TERMS AND CONDITIONS. LICENSEE FURTHER AGREES THAT THIS 
AGREEMENT CONSTITUTES THE ENTIRE UNDERSTANDING OF LIC-
ENSEE AND LICENSOR WITH RESPECT TO THE SUBJECT MATTER 
HEREOF AND COMPLETELY SUPERCEDES ANY PRIOR UNDER-
STANDINGS, EITHER ORAL OR WRITTEN. ANY MODIFICATION OF 
THIS AGREEMENT SHALL BE MADE ONLY BY MUTUAL AGREEMENT 
AND EVIDENCED BY WRITTEN AMMENDMENT SIGNED BY BOTH 
LICENSOR AND LICENSEE.

 

 

SOFTWARE LICENSE AGREEMENT

Summary of Contents for Alpha Elite




























































Reviews:

Related manuals for Alpha Elite