June 7, 2004
31
P as s word L evels
T o change
Enable Secure Password
fr om
No
to
Yes
:
1.
P r ess the S pacebar . T he
Changing Secure Password
scr een is displayed.
T his scr een pr ovides you the oppor tunity to cr eate and ver ify a new passwor d.
F ield Name
Des cription
Value(s )
Enable Secure
Password
T his Þeld is used to control changes to a pagerÕs frequency and the
associated receiver kit number. When activated, the
Changing
Secure Password
screen is immediately displayed. S hould the
incorrect password be entered eight times, the pager enters the Dead
Pager mode.
No
Yes
Enable Local
Password
T his Þeld allows you to provide password protection when reading or
writing to the pagerÕs codeplug. When this option is set to
Yes
, a
password is required to read the pagerÕs programmed feature set or
program the pager with a new feature set. When activated, the
Changing Local Password
screen is immediately displayed.
S hould the incorrect password be entered eight times, the pager enters
the Dead Pager mode.
No
Yes
Enable OTA
Programming
With this option selected, a pager or pagers can be remotely reconÞgured.
It can be used to change options, enable a temporarily disabled pager or
disable a pager, and change codeplug data. T he OTA page cannot re-
enable a dead (eight attempts with an incorrect password) pager.
No
Yes
Silent OTA
Programming
With this option selected, the pager powers-up silently after it has been
programmed over the air. T his Þeld can only be accessed when
Enable
OTA Programming
is set to
Yes
.
No
Yes
Data Inversion
No
Yes
Product Family Alpha Elite
PAGER PROGRAMMING SOFTWARE
Using Your PPS
