unication Alpha Elite, Programmer'S Manual

Page: 12 / 59

June 7
,
2004 3
Product Family Alpha Elite PAGER PROGRAMMING SOFTWARE
Getting Started
Personal Computer Configuration
View the CONFIG.SYS file for the following statements and minimum values:
BUFFERS = 20
FILES = 35
Edit the CONFIG.SYS file if necessary.
Preparing a Pager for Reading or Programming
1. Turn the pager on.
2. Remove the Pager Mechanical Interface insert (refer to “Exploded View Dia-
gram and Parts List” on page 52) by prying it out with the flat-tip of a
screwdriver.
3. Align the pager contact pin holes with the contact pins of the Pager Mechanical
Interface. A red light illuminates on the Programming Interface to indicate
proper contact.
4. Close the fixture latch to secure the pager. The pager is now ready to read or
program.