General
5
0. General
Introduction
The Flotronic Pumps ‘One-Nut’ Slimline Stainless Steel Pump is used in a wide range of industries including
chemical, cosmetic, paints, pharmaceutical, adhesive and hygienic applications.
The pumps are designed to be safe, simple, easy to use and maintain due to the ‘One-Nut’ design.
With proper attention to maintenance, Flotronic Pumps ‘One-Nut’ Stainless Steel Pumps will give efficient
trouble free operation.
This manual will familiarise operators with detailed information on installing, operating and maintenance
procedures.
Safety Notice
The following safety notices are included throughout this manual but are listed here for clarity:
1. Operation of this equipment must be carried out in accordance with the instructions provided
within this manual.
2. Personnel involved in the installation, operation and/or maintenance of this equipment must
be competent to carry out the procedures detailed within this manual.
3. Do not operate this equipment if it has a known fault.
4. Only original Flotronic Pumps spare parts should be used in the repair and maintenance of
this equipment.
5. Do not exceed 7.2 Barg (105PSI) air supply pressure and ensure the compressed air supply
is filtered, dry and oil free to the specifications detailed in section 1.3.5.
6. Do not modify this equipment from manufacturers original specifications.
7. Regular maintenance schedules must be followed to ensure safe and reliable pump operation.
See ‘Section 3. Maintenance’ for more details.
8.
Before maintenance ensure the air supply, delivery and suction pipelines have been isolated
and that any residual pressure within the pump has been relieved.
9. Always wear safety glasses when operating this equipment. In the unlikely event of a
diaphragm failure product may be ejected through the air silencers
10. Never operate the pump without the suction and delivery pipe work connected.
11. Work area must be kept clear to avoid potential hazards.
www.unibloctech.co
m
