Service Manual UTG1000X Series
Instruments.uni-trend.com
8
/
20
safety standards, can provide good shell grounding performance, and is suitable for the regulations of the
country or region where it is located.
Please follow the steps below to install your AC power cord:
●
Verify that the power cord is not damaged.
●
When installing the instrument, please allow enough space for you to connect the power cord.
●
Plug the supplied three-core power cord into a well-grounded power outlet.
Static Protection
Electrostatic discharge can cause damage to components, and electrostatic discharge may cause invisible
damage to components during transportation, storage, and use.
The following measures reduce electrostatic discharge damage that may occur during testing equipment:
●
Testing should be performed in an anti-static area whenever possible;
●
Before connecting the cable to the instrument, its inner and outer conductors should be grounded
briefly to discharge static electricity;
●
Make sure all instruments are properly grounded to prevent buildup of electrostatic charges.
Check serial numbers and system information
UNI-T is constantly improving its product performance, usability, and reliability. UNI-T service personnel can
access the according to the instrument serial number and system information.
The serial number is located on the rear cover serial label, or the analyzer is powered on, press Utility
→
System
→
About. System information is useful for updates and post-market upgrades.
2.Foreword
Supported Products
This manual covers servicing the following products:
UTG1022X
、
UTG1022-PA
、
UTG1042X
；
Check for specific product names in headers, titles, table or graph titles, or text at the top of the page.
Material without any specific product designation applies to all products in the brochure.
Where to find operational information
For information on instrument installation, operation, and networking, refer to the help or user manual that
came with the function/arbitrary wave generator.
