Service Manual UTG1000X Series
Instruments.uni-trend.com
5
/
20
CAT IV
Three-phase public power supply equipment and outdoor power
supply line equipment. Equipment designed for "primary connection",
such as the power distribution system of the power station; power
meters, front-end over-set protection, and any outdoor transmission
lines.
CE
Certified
The CE mark is a registered trademark of the European Union.
UKCA
Certified
The UKCA logo is a registered trade mark in the United Kingdom.
ETL
Certified
Meets UL STD 61010-1, 61010-2-030, Meets CSA STD C22.2 No. 61010-1
and 61010-2-030.
Abandoned
Do not place the device and its accessories in the trash. Items must
be disposed of properly in accordance with local regulations.
Environmental
friendly
Environmental protection uses a period mark, this symbol indicates
that within the indicated time, hazardous or toxic substances will not
leak or be damaged. The product’s environmental protection use
period is 40 years. During this period, it can be used with confidence.
It should enter the recycling system after the specified time.
Safety requirements
Warning
Prepare before
use
Please use the supplied power cord to connect this device to an AC power source;
The AC input voltage of the line complies with the rated value of this device; the
specific rated value is detailed in this product manual.
The line voltage switch of this equipment matches the line voltage;
The line voltage of the line fuse of this equipment is correct;
Do not use it for measuring main circuits.
View All
Terminal
Ratings
In order to avoid fire and the impact of excessive current, please check all the ratings
and marking instructions on the product, and please refer to the product manual for
detailed information on ratings before connecting the product.
Use the power
cord correctly
Only use the instrument-specific power cord approved by the local country. Check
whether the insulation layer of the wire is damaged or whether the wire is exposed, and
check whether the test wire is connected. If the wire is damaged, please replace it
before using the instrument.
Instrument
ground-ing
To avoid electric shock, the grounding conductor must be connected to the ground.
This product is grounded through the grounding wire of the power supply. Before the
product is powered on, please be sure to ground the product.
AC power
requirements
Please use the specified AC power supply for this device. Please use the power cord
approved by the country where you are located and make sure that the insulation layer
is not damaged.
