Bi-spectrum network camera
User Manual
Thermal Sensor Configuration
Issue V1.0
（
2021-10-25
）
61
5.5 Set Pseudocolor
Figure 5-6 shows the
Set pseudocolor
setting interface.
Figure 5-6
Set pseudocolor setting interface
Step 1
Click
in the lower left corner of Sensor Setting, and choose set pseudo
color
Step 2
Choose polarity/LUT mode from drop-list.
Step 3
Enable or disable the temperature strip switch
Step 4
Click Save, the message "Save succeed" is displayed, the system saves the settings.
