Bi-spectrum network camera
Configuring Thermal
User Manual
36
Issue V1.0
（
2021-10-25
）
Method 2
：
Hold down the left mouse button, drag and release mouse to select the alarm
time within 0:00-24:00 from Monday to Sunday.
NOTE
When you select time by dragging the cursor, the cursor cannot be moved out of the time area.
Otherwise, no time can be selected.
Method 3
：
Click
in the alarm time page to select the whole day or whole week.
Deleting alarm time:
Click
again or inverse selection to delete the selected alarm
time.
Step 4
Click
Apply
.
The message "Apply success" is displayed, the system saves the settings.
There are seven types schedule linkage to set, like threshold alarm, threshold warning,
temperature difference alarm, temperature difference warming, temperature section alarm,
temperature rise alarm and temperature rise warning.
----End
3.7 Bad Point Check
Operation Procedure
Step 1
Choose
Configuration >Thermal > Bad Point Check
.
The
Bad Point Check
page is displayed, as shown in Figure 3-11.
If the image has a white dot as shown in figure, user can test the function to recover the
bad point. User should connect the technical support at this condition to make sure to
apply.
